M-VAVE FM-1 (Carnac OS 0.9.3) MIDI CC chart, NRPN and OSC map¶
The M-VAVE FM-1 MIDI implementation: 1 CC, 3 SysEx commands, each named, for Claude (MCP), SuperCollider or any OSC app.
| Device | M-VAVE FM-1 |
|---|---|
| Vendor | M-VAVE |
| OSC prefix | /fm1_carnac |
| Source | 📘 From the manufacturer's documentation |
| Firmware | carnac-0.9.3 |
| Revision | Carnac OS 0.9.3 (alternative firmware by OrbVorgis) |
| Upstream | vendor-doc |
| Driver file | devices/m-vave/fm-1.vendor.fw-carnac-0.9.3.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
Other versions of the M-VAVE FM-1 (93)
stock firmware V15 · stock firmware V16 · 386DX 1.0.2 · AMB-1 1.3 · BEETLE 1.4.25 · Bunker Evolved 1.0.0 · Bytemania 1.2.0 · Chipbox 1.2.4 · ChoralRoot 0.26.1 · fm1-chord 0.3 · Clipper 1.1-experimental · CoralFlower 0.5 · CS-1 2026.10.22 · CTL-1 1.0 · Cut-A-Dor 1.2.1 · Dinghy 0.4 · DRIFT 0.8 · DUB-1 1.3.0 · DUELL 1.0 · Evander's Music Box 1.5.2 · ETCH 1.61 · Fart Machine One 1.1.0 · Felucca 1.6.1 · Felucca [Salt] 0.9-salt14 · Felucca 8 Patterns 1.6.1_and_sequences · FiMba-1 0.6.1 · Flyfish 1.0.1-4e5efb8 · FM-106 Beta4 · FM1-GM 1.0.2 · FMEL-1 1.0 · FMini-1 1.8.0 · FOMAJAM 0.1.6 · FoMni 0.4 · FRASIL 1.0 · Frodhes 0.9.4 · FuMi-1 1.1.0 · Pocket GammaWave 1.0-GW · GHOULBOX 2.3.2 · Golana 1.2 · Golana DZ Edition 0.1.0-beta · GR!MM 1.0 · HERA 1.1 · Hortator 0.23.3 · HYP-1 1.5.54 · Jangada 1.0.1 · JIANT FM 0.9.9-beta4a-813869d · KAWA 0.5 · Ketch 0.1-beta · LOOM-8 0.7 · MAKU 1.0 · MC-1 1.2.0 · Melodee 1.4.5 · MIN-1 0.2.1 · Mini-Tone 1.0.2 · MODELAR 0.3 · MONK-1 0.9.1 · MORPHEUS 1.0.0 · Mutable Dreams 1.0 · MYCELIUM 1.0-test · Niagara Drift 0.2 · No Man Sky FM 0.5 · NOIZ DEMONS 666 · OberVave 3.0.1 · FM1 Open V14 · OPN-1 2.0.0 · ORBIT 0.7.1 · PIGEON 0.5.0-beta.1 · Polly 0.5 · PurpleMonkey 0.11 · FM1 Quest 38 · Rainbow Mode 1.1.5-rb · Shine On 3.0.1 · FM-1 SID 0.1 · SID-1 1.0.0 · SIDOU 0.3.1 · Skiff 1.4 · SLOOP 2.8.1 · SLOOP ALG ALG05-TEST · SLOOP DX7 Banks 2.5-b28-test · SLOOP Floyd FM 2.4 · sloopDX 4.0 · Tessera 2.0.1 · Tonitor 2026.10.23 · TRIBE 0.3-beta · Tuna 1.0-fbc56d3 · Unholy Union 0.2.3 · Vector37 0.3.2 · WaveLoop FM-1 1.0.5.2-midi23 · winampFM Synth 0.12 · X0X 1.1.0 · X0X-RMX 1.1.0 · ZEN-1 1.2 · zp12 2.5
Try it in your browser
Play a virtual FM-1 with any of its community firmwares: M-VAVE FM-1.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/m-vave/fm-1.vendor.fw-carnac-0.9.3.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as fm1_carnac: ask “what can the M-VAVE FM-1 do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (1)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/fm1_carnac/mod_wheel |
1 | 0–127 | continuous | Track |
SysEx commands (3)¶
| OSC address | Arguments |
|---|---|
/fm1_carnac/program |
program: u7 |
/fm1_carnac/system/info |
|
/fm1_carnac/system/identify |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /fm1_carnac/note/on <note> <velocity>, /fm1_carnac/cc/<number> <value>, /fm1_carnac/pitchbend <0-16383>, /fm1_carnac/program_change <n>.
Limitations¶
Carnac OS 0.9.3 by OrbVorgis (GPL-3.0), a instrument firmware for the FM-1. Source SYNTH_VERSION set at build (--release); default 'DEV'; Manual lists Program Change and full CC map as 'in the works', yet the source already handles Program Change. Channels: Two layers, each on its own channel: layer 1 ch1, layer 2 ch2 (GLOBAL MIDI CH LAYER1/LAYER2); SINGLE mode uses layer 1's channel, DUAL/SPLIT route per layer. Messages on other channels ignored. USB and TRS in. Pitch bend: MSB only (-64.+63), range GLOBAL BEND RANGE 0-24 st, default 2 (midi_io.c:59, synth_voice.c:512). Aftertouch: channel pressure -> mod source (midi_io.c:58). Clock: in USB+TRS: F8/FA/FB/FC with CLOCK SOURCE = MIDI (midi_clock.c:135-148); no SPP. Out USB only when CLOCK OUT = USB and clock internal: F8 24 ppqn, FA/FC with sequencer/arp transport (synth_main_fm1.c:190-215). MIDI out: USB: clock/start/stop only; MAQ sequencer and arp send notes/CC/PC to the internal synth only, not out. NRPN: none (no RPN either: bend range set on GLOBAL page only). CCs without a fixed number: custom CC1 (CC number set in GLOBAL (0 = unassigned, default); value is a mod source); custom CC2 (as CUSTOM CC1). SysEx `F0 7D 46 4C`: Felucca/X0X editor frame: INFO (reply 'CARNAC OS \<ver>'), PING 25, wavetable store cmds, PCM sample-slot cmds, 44 PERF TEST, 46 STATS, 47 DEBUG. SysEx `F0 00 59 (pack7)`: M-UPGRADE vendor update protocol (F0 pack7(00 59 cmd .) F7; cmd 0x11 handshake answers package identity; F0 22 24 35 7F F7 upgrade; F0 22 24 35 7D F7 UBOOT) (X0X platform). SysEx `F0 43`: no raw DX7 F0 43 parser. Identity: vendor identify from X0X build (b.PRODUCT, must match FM-1_9\d+, e.g. FM-1_900: make_site.py:72); editor INFO 'CARNAC OS \<ver>'; USB audio name 'X0X FM-1' (manual).
Frequently asked questions¶
How many parameters of the M-VAVE FM-1 can be controlled over MIDI?
SynthHub's map of the M-VAVE FM-1 lists 1 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.
Can an AI agent like Claude control the M-VAVE FM-1?
Yes: SynthHub's hosted MCP server knows the M-VAVE FM-1's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.