SynthHub
Written from devices/behringer/fcb1010.vendor.fw-uno-1.0.4.json, updated 2026-10-27Edit on GitHubJSONMIDNAMOSCQuery

Behringer FCB1010 running FCB/UnO User Guide v1.0.4 and uno_changelog.txt

The Behringer FCB1010 MIDI implementation: its MIDI messages, each named, for Claude (MCP), SuperCollider or any OSC app.

  • sourcemaker's documentation
  • firmwareuno-1.0.4
Maker
Behringer
Firmware
FCB/UnO User Guide v1.0.4 and uno_changelog.txt
Source
maker's documentation

Communities

Share and load its sounds

Plug the Behringer FCB1010 into your computer, open shared presets in Chrome, Edge or Opera and press Connect my synth: SynthHub finds it, takes the sound it plays and names it. Sounds others shared for it load from their page the same way.

https://www.fcb1010.eu/downloads/FCB_UnO_v1_0_4_UserGuide.pdf

Repository

MIDI controls

0 controls, from the source at FCB/UnO User Guide v1.0.4 and uno_changelog.txt

Performance MIDI

Notes, pitch bend and any CC are also available: /fcb1010/note/on <note> <velocity>, /fcb1010/cc/<number> <value>, /fcb1010/pitchbend <0-16383>, /fcb1010/program_change <n>.

The same MIDI as fcb1010.vendor.fw-unknown, which this firmware shares. JSON

Use it

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device behringer/fcb1010.vendor.fw-uno-1.0.4 --out-port <N> --in-port <M>

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as fcb1010: ask “what can the Behringer FCB1010 do?” and it reads this map with list_routes. See the MCP guide.

Limitations

UnO shares the stock FCB1010 MIDI (presets sending PC, CC and notes, configured on the unit or with the paid FCB/UnO ControlCenter) and adds a stompbox mode. v1.0.3: SysEx receive always on, the patch dump is sent in 16 chunks of 160 bytes instead of one 2,352-byte message, and an acknowledge follows a received dump; v1.0.4: expression pedals send from the first movement, over the full 0-127 range. A paid replacement EPROM chip sold by fcb1010.eu; nothing is hosted here. Untested on hardware.

Firmwares

The Behringer FCB1010 runs 4 firmwares SynthHub maps, each with its own MIDI or another's it shares. All the devices with several: firmwares.

FirmwareFromLicenceMIDISounds
FCB-505 firmware sheetfcb1010.eusame as behringer/fcb1010.vendor.fw-unknown
FCB/UnO User Guide v1.0.4 and uno_changelog.txtfcb1010.eusame as behringer/fcb1010.vendor.fw-unknown
UnO for Kemper manual and uno4kemper_changelog.txtfcb1010.eusame as behringer/fcb1010.vendor.fw-unknown
UnO2 User Manual and uno2_changelog.txtfcb1010.euadds to behringer/fcb1010.vendor.fw-unknown

Other sources

The Behringer FCB1010 is mapped in 5 versions. FCB1010 User Manual.

Frequently asked questions

Can an AI agent like Claude control the Behringer FCB1010?

Yes: SynthHub's hosted MCP server knows the Behringer FCB1010's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.