SynthHub
Written from devices/behringer/fcb1010.vendor.fw-fcb-505.json, updated 2026-10-27Edit on GitHubJSONMIDNAMOSCQuery

Behringer FCB1010 running FCB-505 firmware sheet

The Behringer FCB1010 MIDI implementation: its MIDI messages, each named, for Claude (MCP), SuperCollider or any OSC app.

  • sourcemaker's documentation
  • firmwarefcb-505
Maker
Behringer
Firmware
FCB-505 firmware sheet (MIDI implementation chart)
Source
maker's documentation

Communities

Share and load its sounds

Plug the Behringer FCB1010 into your computer, open shared presets in Chrome, Edge or Opera and press Connect my synth: SynthHub finds it, takes the sound it plays and names it. Sounds others shared for it load from their page the same way.

https://www.fcb1010.eu/downloads/FCB-505.pdf

Repository

MIDI controls

0 controls, from the source at FCB-505 firmware sheet (MIDI implementation chart)

Performance MIDI

Notes, pitch bend and any CC are also available: /fcb1010/note/on <note> <velocity>, /fcb1010/cc/<number> <value>, /fcb1010/pitchbend <0-16383>, /fcb1010/program_change <n>.

The same MIDI as fcb1010.vendor.fw-unknown, which this firmware shares. JSON

Use it

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device behringer/fcb1010.vendor.fw-fcb-505 --out-port <N> --in-port <M>

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as fcb1010: ask “what can the Behringer FCB1010 do?” and it reads this map with list_routes. See the MCP guide.

Limitations

FCB-505 sends one hard-coded message per switch, for the Boss RC-505: all on MIDI channel 13; footswitches 1-10 send CC20-CC29, UP CC30 and DOWN CC31, value 127 on press and 0 on release; the left pedal CC14 and the right CC15, continuously. MIDI IN is merged into MIDI OUT. These arrive as /cc messages; nothing to send to it. A paid replacement EPROM chip sold by fcb1010.eu; nothing is hosted here. Untested on hardware.

Firmwares

The Behringer FCB1010 runs 4 firmwares SynthHub maps, each with its own MIDI or another's it shares. All the devices with several: firmwares.

FirmwareFromLicenceMIDISounds
FCB-505 firmware sheetfcb1010.eusame as behringer/fcb1010.vendor.fw-unknown
FCB/UnO User Guide v1.0.4 and uno_changelog.txtfcb1010.eusame as behringer/fcb1010.vendor.fw-unknown
UnO for Kemper manual and uno4kemper_changelog.txtfcb1010.eusame as behringer/fcb1010.vendor.fw-unknown
UnO2 User Manual and uno2_changelog.txtfcb1010.euadds to behringer/fcb1010.vendor.fw-unknown

Other sources

The Behringer FCB1010 is mapped in 5 versions. FCB1010 User Manual.

Frequently asked questions

Can an AI agent like Claude control the Behringer FCB1010?

Yes: SynthHub's hosted MCP server knows the Behringer FCB1010's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.