devices/arturia/microfreak.vendor.fw-superfreaker-0.1.2.json, updated 2026-10-26Edit on GitHubJSONCSVMIDNAMOSCQueryArturia MicroFreak running SuperFreaker 0.1.2
The Arturia MicroFreak MIDI implementation: 26 CC, each named, for Claude (MCP), SuperCollider or any OSC app.
- sourcemaker's documentation
- firmwaresuperfreaker-0.1.2
- Maker
- Arturia
- Firmware
- SuperFreaker 0.1.2 (patch of 5.0.0.2084 by Freakier Firmware Labs)
- Source
- maker's documentation
Use of this device
In the last 30 days: calls from agents aimed at it, counted since 2026-11-18.
Communities
Share and load its sounds
Plug the Arturia MicroFreak into your computer, open shared presets in Chrome, Edge or Opera and press Connect my synth: SynthHub finds it, takes the sound it plays and names it. Sounds others shared for it load from their page the same way.
https://freakierfirmware.com/microfreak/
MIDI controls
26 controls, from the source at SuperFreaker 0.1.2 (patch of 5.0.0.2084 by Freakier Firmware Labs)
Panel (Arturia manual)
| Control | CC | Range | Name to send |
|---|---|---|---|
| Spice | 2 | 0–127 | /microfreak_superfreaker/spice |
| Glide | 5 | 0–127 | /microfreak_superfreaker/glide |
| Oscillator type | 9 | discrete | /microfreak_superfreaker/oscillator_type |
| Oscillator wave | 10 | 0–127 | /microfreak_superfreaker/oscillator_wave |
| Oscillator timbre | 12 | 0–127 | /microfreak_superfreaker/oscillator_timbre |
| Oscillator shape | 13 | 0–127 | /microfreak_superfreaker/oscillator_shape |
| Filter cutoff | 23 | 0–127 | /microfreak_superfreaker/filter_cutoff |
| Cycling env amount | 24 | 0–127 | /microfreak_superfreaker/cycling_env_amount |
| Filter amount | 26 | 0–127 | /microfreak_superfreaker/filter_amount |
| Cycling env hold | 28 | 0–127 | /microfreak_superfreaker/cycling_env_hold |
| Envelope sustain | 29 | 0–127 | /microfreak_superfreaker/envelope_sustain |
| Keyboard hold toggle | 64 | switch | /microfreak_superfreaker/keyboard_hold_toggle |
| Filter resonance | 83 | 0–127 | /microfreak_superfreaker/filter_resonance |
| Arp seq rate free | 91 | 0–127 | /microfreak_superfreaker/arp_seq_rate_free |
| Arp seq rate sync | 92 | 0–127 | /microfreak_superfreaker/arp_seq_rate_sync |
| Lfo rate free | 93 | 0–127 | /microfreak_superfreaker/lfo_rate_free |
| Lfo rate sync | 94 | 0–127 | /microfreak_superfreaker/lfo_rate_sync |
| Cycling env rise | 102 | 0–127 | /microfreak_superfreaker/cycling_env_rise |
| Cycling env fall | 103 | 0–127 | /microfreak_superfreaker/cycling_env_fall |
| Envelope attack | 105 | 0–127 | /microfreak_superfreaker/envelope_attack |
| Envelope decay | 106 | 0–127 | /microfreak_superfreaker/envelope_decay |
SuperFreaker
| Control | CC | Range | Name to send |
|---|---|---|---|
| Volume | 7 | 0–127 | /microfreak_superfreaker/volume |
| Release | 72 | 0–127 | /microfreak_superfreaker/release |
| Legato glide | 68 | 0–127 | /microfreak_superfreaker/legato_glide |
| All sound off | 120 | trigger | /microfreak_superfreaker/all_sound_off |
| All notes off | 123 | trigger | /microfreak_superfreaker/all_notes_off |
Performance MIDI
Notes, pitch bend and any CC are also available: /microfreak_superfreaker/note/on <note> <velocity>, /microfreak_superfreaker/cc/<number> <value>, /microfreak_superfreaker/pitchbend <0-16383>, /microfreak_superfreaker/program_change <n>.
Use it
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device arturia/microfreak.vendor.fw-superfreaker-0.1.2 --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
osc-bridge osc-send /microfreak_superfreaker/spice 63
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as microfreak_superfreaker: ask “what can the Arturia MicroFreak do?” and it reads this map with list_routes. See the MCP guide.
Limitations
SuperFreaker 0.1.2 (open beta; the boot screen shows SUPERFREAKER and its version; the + Loud build is the same with about 7 dB more level). It keeps the official CCs and adds CC 7 volume (until the knob is touched), CC 72 Release, CC 68 Legato Glide, CC 120 and CC 123 to release held notes. Two global settings change what it accepts: Ignore Prog Chg (Utility > Global > MIDI, ignores bank select too) and Ignore MIDI Start (Utility > Global > Sync; clock and stop still work). Its other additions (drive, lo-fi, tape echo, wavefolder, sub octave, randomizer) sit behind Shift and the menus, with no CC. Not to be confused with freakpatch, which also puts Release on CC 72. Untested here on hardware.
Firmwares
The Arturia MicroFreak runs 5 firmwares SynthHub maps, each with its own MIDI or another's it shares. All the devices with several: firmwares.
| Firmware | From | Licence | MIDI | Sounds |
|---|---|---|---|---|
| freakpatch 0.3.0, Release + matrix build | github.com/ThisFreakDoesntExist | its own | ||
| freakpatch 0.3.0, Release build | github.com/ThisFreakDoesntExist | its own | ||
| FreakSwap 8705fc3 | github.com/doriamxyz | same as arturia/microfreak | ||
| microfreak-tools 0.1.0 plugins | github.com/gbryant | Apache-2.0 | same as arturia/microfreak | |
| SuperFreaker 0.1.2 | freakierfirmware.com | its own |
Other sources
The Arturia MicroFreak is mapped in 6 versions. per pencilresearch canonical CSV.
Frequently asked questions
Which MIDI CC controls the filter cutoff on the Arturia MicroFreak?
CC 23 (0–127), named /microfreak_superfreaker/filter_cutoff in SynthHub's map.
How many parameters of the Arturia MicroFreak can be controlled over MIDI?
SynthHub's map of the Arturia MicroFreak lists 26 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.
Can an AI agent like Claude control the Arturia MicroFreak?
Yes: SynthHub's hosted MCP server knows the Arturia MicroFreak's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.