SynthHub
Written from devices/arturia/microfreak.vendor.fw-freakswap-8705fc3.json, updated 2026-10-26Edit on GitHubJSONCSVMIDNAMOSCQuery

Arturia MicroFreak running FreakSwap 8705fc3

The Arturia MicroFreak MIDI implementation: 21 CC, each named, for Claude (MCP), SuperCollider or any OSC app.

  • sourcemaker's documentation
  • firmwarefreakswap-8705fc3
Maker
Arturia
Firmware
FreakSwap 8705fc3 (by doriamxyz)
Source
maker's documentation
README.mdfrom the author's repository; not claimed yet, anyone can improve it

From the README of doriamxyz/FreakSwap at 8705fc3, licence GPL-2.0.

FreakSwap

Open FreakSwap

A free, independent browser tool for building a custom MicroFreak engine lineup. Choose which original engines to replace, listen to examples, and prepare a modified firmware file locally in your browser.

Use

  1. Choose the original positions and their replacement engines.
  2. Optionally load a compatible Yamaha DX7 bank for 6-Op FM Custom and select its presets.
  3. Continue and select the official MicroFreak firmware 5.0.0.2084 (.mff).
  4. Prepare and download the modified firmware and installation guide.
  5. Back up your presets and install manually with Arturia MIDI Control Center.

The official firmware is not included or uploaded. Imported banks remain in the browser session and must be selected again after a reload. Audio examples are digital references, not recordings of the instrument's analog output.

Read the whole README on GitHub

Use of this device

In the last 30 days: calls from agents aimed at it, counted since 2026-11-18.

Communities

Share and load its sounds

Plug the Arturia MicroFreak into your computer, open shared presets in Chrome, Edge or Opera and press Connect my synth: SynthHub finds it, takes the sound it plays and names it. Sounds others shared for it load from their page the same way.

https://github.com/doriamxyz/FreakSwap

Repository · Download

MIDI controls

21 controls, from the source at FreakSwap 8705fc3 (by doriamxyz)

General

ControlCCRangeName to send
Glide50–127/microfreak_freakswap/general/glide

Oscillator

ControlCCRangeName to send
Type90–127/microfreak_freakswap/oscillator/type
Wave100–127/microfreak_freakswap/oscillator/wave
Timbre120–127/microfreak_freakswap/oscillator/timbre
Shape130–127/microfreak_freakswap/oscillator/shape

Filter

ControlCCRangeName to send
Cutoff230–127/microfreak_freakswap/filter/cutoff
Resonance830–127/microfreak_freakswap/filter/resonance

Cycling envelope

ControlCCRangeName to send
Cycling env rise1020–127/microfreak_freakswap/cycling_envelope/cycling_env_rise
Cycling env fall1030–127/microfreak_freakswap/cycling_envelope/cycling_env_fall
Cycling env hold280–127/microfreak_freakswap/cycling_envelope/cycling_env_hold
Cycling env amount240–127/microfreak_freakswap/cycling_envelope/cycling_env_amount

Arpeggiator/sequencer

ControlCCRangeName to send
Arpeggiator sequencer arp seq rate free910–127/microfreak_freakswap/arpeggiator_sequencer/arp_seq_rate_free
Arpeggiator sequencer arp seq rate sync920–127/microfreak_freakswap/arpeggiator_sequencer/arp_seq_rate_sync

LFO

ControlCCRangeName to send
Rate free930–127/microfreak_freakswap/lfo/rate_free
Rate sync940–127/microfreak_freakswap/lfo/rate_sync

Envelope

ControlCCRangeName to send
Attack1050–127/microfreak_freakswap/envelope/attack
Decay1060–127/microfreak_freakswap/envelope/decay
Sustain290–127/microfreak_freakswap/envelope/sustain
Filter amount260–127/microfreak_freakswap/envelope/filter_amount

Keyboard

ControlCCRangeName to send
Hold button toggle640–127/microfreak_freakswap/keyboard/hold_button_toggle
Spice20–127/microfreak_freakswap/keyboard/spice

Performance MIDI

Notes, pitch bend and any CC are also available: /microfreak_freakswap/note/on <note> <velocity>, /microfreak_freakswap/cc/<number> <value>, /microfreak_freakswap/pitchbend <0-16383>, /microfreak_freakswap/program_change <n>.

The same MIDI as microfreak, which this firmware shares. JSON

Use it

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device arturia/microfreak.vendor.fw-freakswap-8705fc3 --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /microfreak_freakswap/general/glide 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as microfreak_freakswap: ask “what can the Arturia MicroFreak do?” and it reads this map with list_routes. See the MCP guide.

How it is recognised

  • The Arturia MicroFreak answers the MIDI Identity Request (F0 7E 7F 06 01 F7) with F0 7E ·· 06 02 00 20 6B 06 00 06 01 ….
  • Its firmware version is in bytes 12, 13, 14, 15 of the answer (each byte as a number).
  • Its USB MIDI port names hold “MicroFreak”.

osc-bridge detect sends these and picks this driver when they match.

Programs and banks

A program change selects a sound.

BankBank select (CC 0 / CC 32)Program changeNumbersShown as
001-1280 / –0–1271–128001-128
129-2561 / –0–127129–256129-256
257-3842 / –0–127257–384257-384
385-5123 / –0–127385–512385-512

Recall one with /microfreak_freakswap/program/recall <bank> <number> (the bank by name, the number as shown).

Reading a stored sound back: a request names the stored program.

512 presets (1-512, user 129-512 since firmware 5.0): CC 0 = (preset - 1) / 128, then program change (preset - 1) mod 128, on channel 1; it changes the active sound only (ManageFreak docs/PROTOCOLLO.md and freakout microfreak_midi.py select_preset, both checked on the device). Presets read by Arturia SysEx F0 00 20 6B 07 01 <seq> ..., operation 19h per preset 0-511 (Elektroid).

Limitations

FreakSwap by doriamxyz replaces chosen MicroFreak oscillator engine slots with Plaits-derived engines (one, 6-Op FM Custom, loads a DX7 bank), installed through MIDI Control Center. The MIDI chart is unchanged, but a CC 9 (oscillator type) value may then select a different engine: which one depends on the user's slot table, not mapped. Project licence not stated (GPL-2.0 for the bundled verifier). Untested on hardware.

Firmwares

The Arturia MicroFreak runs 5 firmwares SynthHub maps, each with its own MIDI or another's it shares. All the devices with several: firmwares.

FirmwareFromLicenceMIDISounds
freakpatch 0.3.0, Release + matrix buildgithub.com/ThisFreakDoesntExistits own
freakpatch 0.3.0, Release buildgithub.com/ThisFreakDoesntExistits own
FreakSwap 8705fc3github.com/doriamxyzsame as arturia/microfreak
microfreak-tools 0.1.0 pluginsgithub.com/gbryantApache-2.0same as arturia/microfreak
SuperFreaker 0.1.2freakierfirmware.comits own

Other sources

The Arturia MicroFreak is mapped in 6 versions. per pencilresearch canonical CSV.

Frequently asked questions

Which MIDI CC controls the filter cutoff on the Arturia MicroFreak?

CC 23 (0–127), named /microfreak_freakswap/filter/cutoff in SynthHub's map.

How many parameters of the Arturia MicroFreak can be controlled over MIDI?

SynthHub's map of the Arturia MicroFreak lists 21 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.

Can an AI agent like Claude control the Arturia MicroFreak?

Yes: SynthHub's hosted MCP server knows the Arturia MicroFreak's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.