Roland MKS30 w/Tauntek for JX-3P Import MIDI CC chart, NRPN and OSC map¶
The Roland MKS30 w/Tauntek for JX-3P Import MIDI implementation: 35 CC, each named, for Claude (MCP), SuperCollider or any OSC app.
| Device | Roland MKS30 w/Tauntek for JX-3P Import |
|---|---|
| Vendor | Roland |
| OSC prefix | /mks30_w_tauntek_for_jx_3p_import |
| Source | 🎛️ Derived from an Electra One community preset |
| Revision | per Electra preset |
| Upstream | electra-preset |
| Driver file | devices/roland/mks30_w_tauntek_for_jx_3p_import.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/roland/mks30_w_tauntek_for_jx_3p_import.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as mks30_w_tauntek_for_jx_3p_import: ask “what can the Roland MKS30 w/Tauntek for JX-3P Import do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (35)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/mks30_w_tauntek_for_jx_3p_import/range |
32 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/waveform |
33 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/pad_toggle |
48 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/fm_lfo |
40 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/fm_env |
39 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/range |
34 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/waveform |
35 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/tune |
15 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/fine_tune |
14 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/fm_lfo |
42 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/fm_env |
41 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/lfo_depth |
17 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/env_depth |
16 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/env_polarity |
44 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/dco_mix |
18 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/cross_mod |
36 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/hpf |
19 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/cutoff |
21 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/lfo_depth |
23 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/pitch_follow |
24 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/resonance |
20 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/env_depth |
22 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/env_polarity |
37 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/chorus |
45 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/waveform |
43 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/delay |
27 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/rate |
26 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/mode |
38 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/level |
25 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/attack |
28 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/decay |
29 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/sustain |
30 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/release |
31 | 0–254 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/key_assign |
47 | 0–127 | continuous | ||
/mks30_w_tauntek_for_jx_3p_import/velocity |
46 | 0–127 | continuous |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /mks30_w_tauntek_for_jx_3p_import/note/on <note> <velocity>, /mks30_w_tauntek_for_jx_3p_import/cc/<number> <value>, /mks30_w_tauntek_for_jx_3p_import/pitchbend <0-16383>, /mks30_w_tauntek_for_jx_3p_import/program_change <n>.
Limitations¶
Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.
Frequently asked questions¶
Which MIDI CC controls the filter cutoff on the Roland MKS30 w/Tauntek for JX-3P Import?
CC 21 (0–254), named /mks30_w_tauntek_for_jx_3p_import/cutoff in SynthHub's map.
How many parameters of the Roland MKS30 w/Tauntek for JX-3P Import can be controlled over MIDI?
SynthHub's map of the Roland MKS30 w/Tauntek for JX-3P Import lists 35 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.
Can an AI agent like Claude control the Roland MKS30 w/Tauntek for JX-3P Import?
Yes: SynthHub's hosted MCP server knows the Roland MKS30 w/Tauntek for JX-3P Import's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.