Skip to content

Roland JUNO 106 KIWI MIDI CC chart, NRPN and OSC map

The Roland JUNO 106 KIWI MIDI implementation: 49 CC, 2 SysEx commands, each named, for Claude (MCP), SuperCollider or any OSC app.

Device Roland JUNO 106 KIWI
Vendor Roland
OSC prefix /juno_106_kiwi
Source πŸŽ›οΈ Derived from an Electra One community preset
Revision per Electra preset
Upstream electra-preset
Driver file devices/roland/juno_106_kiwi.json
Not tested on the device yet

This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone β€” see CONTRIBUTING.

How do you control it?

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/roland/juno_106_kiwi.json --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /juno_106_kiwi/cutoff 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as juno_106_kiwi: ask β€œwhat can the Roland JUNO 106 KIWI do?” and it reads this map with list_routes. See the MCP guide.

MIDI CC and NRPN parameters (49)

OSC address CC NRPN (MSB/LSB) Range Nature Section
/juno_106_kiwi/cutoff 41 0–127 continuous
/juno_106_kiwi/resonance 42 0–127 continuous
/juno_106_kiwi/keyboard 43 0–127 continuous
/juno_106_kiwi/cutoff 44 0–127 continuous
/juno_106_kiwi/chorus 57 0–127 continuous
/juno_106_kiwi/volume 7 0–127 continuous
/juno_106_kiwi/amount 47 0–127 continuous
/juno_106_kiwi/source 48 0–127 continuous
/juno_106_kiwi/amount 45 0–127 continuous
/juno_106_kiwi/source 46 0–127 continuous
/juno_106_kiwi/key_mode 104 0–127 continuous
/juno_106_kiwi/porta_time 5 0–127 continuous
/juno_106_kiwi/attack 51 0–127 continuous
/juno_106_kiwi/decay 52 0–127 continuous
/juno_106_kiwi/sustain 53 0–127 continuous
/juno_106_kiwi/release 54 0–127 continuous
/juno_106_kiwi/internal_veloc 107 0–127 continuous
/juno_106_kiwi/attack 65 0–127 continuous
/juno_106_kiwi/decay 66 0–127 continuous
/juno_106_kiwi/sustain 67 0–127 continuous
/juno_106_kiwi/release 68 0–127 continuous
/juno_106_kiwi/after_level 103 0–127 continuous
/juno_106_kiwi/wave 18 0–127 continuous
/juno_106_kiwi/rate 19 0–127 continuous
/juno_106_kiwi/delay 20 0–127 continuous
/juno_106_kiwi/mode 24 0–127 continuous
/juno_106_kiwi/wave 21 0–127 continuous
/juno_106_kiwi/rate 22 0–127 continuous
/juno_106_kiwi/delay 23 0–127 continuous
/juno_106_kiwi/mode 25 0–127 continuous
/juno_106_kiwi/amount 105 0–127 continuous
/juno_106_kiwi/range 8 0–127 continuous
/juno_106_kiwi/wave 9 0–127 continuous
/juno_106_kiwi/amount 10 0–64 continuous
/juno_106_kiwi/source 11 0–127 continuous
/juno_106_kiwi/sub_level 33 0–127 continuous
/juno_106_kiwi/noise_level 34 0–127 continuous
/juno_106_kiwi/amount 14 0–127 continuous
/juno_106_kiwi/source 15 0–127 continuous
/juno_106_kiwi/amount 12 0–127 continuous
/juno_106_kiwi/trig 61 0–127 continuous
/juno_106_kiwi/vca_lfo_src 60 0–127 continuous
/juno_106_kiwi/vca_lfo_level 59 0–127 continuous
/juno_106_kiwi/dco 69 0–127 continuous
/juno_106_kiwi/vcf 70 0–127 continuous
/juno_106_kiwi/dco_lfo 71 0–127 continuous
/juno_106_kiwi/midi_local 116 0–127 continuous
/juno_106_kiwi/all_notes_off 123 0–127 continuous
/juno_106_kiwi/all_sound_off 120 0–127 continuous

SysEx commands (2)

OSC address Arguments
/juno_106_kiwi/modulates val: u7
/juno_106_kiwi/sysex_message val: u7

Performance MIDI

Notes, pitch bend and any CC are also available: /juno_106_kiwi/note/on <note> <velocity>, /juno_106_kiwi/cc/<number> <value>, /juno_106_kiwi/pitchbend <0-16383>, /juno_106_kiwi/program_change <n>.

Limitations

Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.

Frequently asked questions

Which MIDI CC controls the filter cutoff on the Roland JUNO 106 KIWI?

CC 41 (0–127), named /juno_106_kiwi/cutoff in SynthHub's map.

How many parameters of the Roland JUNO 106 KIWI can be controlled over MIDI?

SynthHub's map of the Roland JUNO 106 KIWI lists 49 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.

Can an AI agent like Claude control the Roland JUNO 106 KIWI?

Yes: SynthHub's hosted MCP server knows the Roland JUNO 106 KIWI's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.