Skip to content

Nord Drum 2 (per pencilresearch canonical CSV) MIDI CC chart, NRPN and OSC map

The Nord Drum 2 MIDI implementation: 36 CC, each named, for Claude (MCP), SuperCollider or any OSC app.

Device Nord Drum 2
Vendor Nord
OSC prefix /drum_2
Source πŸ“¦ Derived from MIDI Guide (community CC/NRPN data)
Firmware unknown
Revision per pencilresearch canonical CSV
Upstream pencilresearch
Data licence CC-BY-SA-4.0 β€” MIDI Guide (https://midi.guide) by Pencil Research and contributors
Driver file devices/nord/drum_2.pencilresearch.fw-unknown.json
Not tested on the device yet

This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone β€” see CONTRIBUTING.

Other versions of the Nord Drum 2 (1)

per Electra preset

How do you control it?

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/nord/drum_2.pencilresearch.fw-unknown.json --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /drum_2/level 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as drum_2: ask β€œwhat can the Nord Drum 2 do?” and it reads this map with list_routes. See the MCP guide.

MIDI CC and NRPN parameters (36)

OSC address CC NRPN (MSB/LSB) Range Nature Section
/drum_2/level 7 0–127 continuous
/drum_2/pan 10 0–127 continuous
/drum_2/noise_filter_freq 14 0–127 continuous
/drum_2/noise_filter_type 15 0–127 continuous
/drum_2/noise_filter_env 16 0–127 continuous
/drum_2/noise_filter_res 17 0–127 continuous
/drum_2/noise_attack_rate 18 0–127 continuous
/drum_2/noise_atk_mode 19 0–127 continuous
/drum_2/noise_decay_type 20 0–127 continuous
/drum_2/noise_decay 21 0–127 continuous
/drum_2/noise_decay_lo 22 0–127 continuous
/drum_2/dist_amount 23 0–127 continuous
/drum_2/dist_type 24 0–127 continuous
/drum_2/eq_frequency 25 0–127 continuous
/drum_2/eq_gain 26 0–127 continuous
/drum_2/echo_feedback 27 0–127 continuous
/drum_2/echo_amount 28 0–127 continuous
/drum_2/tone_spectra 30 0–127 continuous
/drum_2/tone_wave 46 0–127 continuous
/drum_2/tone_timbre_decay 47 0–127 continuous
/drum_2/tone_punch 48 0–127 continuous
/drum_2/tone_decay_type 49 0–127 continuous
/drum_2/tone_decay 50 0–127 continuous
/drum_2/tone_dec_lo 51 0–127 continuous
/drum_2/tone_timbre 52 0–127 continuous
/drum_2/tone_timb_env 53 0–127 continuous
/drum_2/tone_bend_amount 54 0–127 continuous
/drum_2/tone_bend_time 55 0–127 continuous
/drum_2/click_level 56 0–127 continuous
/drum_2/click_type 57 0–127 continuous
/drum_2/mix_balance 58 0–127 continuous
/drum_2/mute_group 59 0–127 continuous
/drum_2/channel_focus 70 0–127 continuous
/drum_2/bank_select 32 / 32 0–16383 continuous
/drum_2/tone_pitch 31 / 63 0–16383 continuous
/drum_2/echo_bpm 29 / 61 0–16383 continuous

Performance MIDI

Notes, pitch bend and any CC are also available: /drum_2/note/on <note> <velocity>, /drum_2/cc/<number> <value>, /drum_2/pitchbend <0-16383>, /drum_2/program_change <n>.

Limitations

CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.

Frequently asked questions

How many parameters of the Nord Drum 2 can be controlled over MIDI?

SynthHub's map of the Nord Drum 2 lists 36 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.

Can an AI agent like Claude control the Nord Drum 2?

Yes: SynthHub's hosted MCP server knows the Nord Drum 2's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.