Skip to content

Jomox MBase 11 MIDI CC chart, NRPN and OSC map

The Jomox MBase 11 MIDI implementation: 33 CC, each named, for Claude (MCP), SuperCollider or any OSC app.

Device Jomox MBase 11
Vendor Jomox
OSC prefix /mbase_11
Source πŸŽ›οΈ Derived from an Electra One community preset
Revision per pencilresearch canonical CSV
Upstream electra-preset
Driver file devices/jomox/mbase_11.json
Not tested on the device yet

This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone β€” see CONTRIBUTING.

How do you control it?

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/jomox/mbase_11.json --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /mbase_11/sound/tune 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as mbase_11: ask β€œwhat can the Jomox MBase 11 do?” and it reads this map with list_routes. See the MCP guide.

MIDI CC and NRPN parameters (33)

OSC address CC NRPN (MSB/LSB) Range Nature Section
/mbase_11/sound/tune 100 0–127 continuous Sound
/mbase_11/sound/pitch 101 0–127 continuous Sound
/mbase_11/sound/decay 102 0–127 continuous Sound
/mbase_11/sound/harmonics 103 0–127 continuous Sound
/mbase_11/sound/pulse 104 0–127 continuous Sound
/mbase_11/sound/noise 105 0–127 continuous Sound
/mbase_11/sound/attack 106 0–127 continuous Sound
/mbase_11/sound/eq 107 0–127 continuous Sound
/mbase_11/sound/compression 113 0–127 continuous Sound
/mbase_11/sound/gate_time 114 0–127 continuous Sound
/mbase_11/sound/metal_noise 115 0–127 continuous Sound
/mbase_11/sound/volume 117 0–127 continuous Sound
/mbase_11/lfo/sync 120 0–127 continuous LFO
/mbase_11/lfo/intensity 121 0–127 continuous LFO
/mbase_11/lfo/rate 122 0–127 continuous LFO
/mbase_11/lfo/one_shot 123 0–127 continuous LFO
/mbase_11/kick_tune 100 0–255 continuous
/mbase_11/kick_pitch 101 0–255 continuous
/mbase_11/kick_decay 102 0–255 continuous
/mbase_11/kick_harmonics 103 0–255 continuous
/mbase_11/kick_pulse 104 0–255 continuous
/mbase_11/kick_noise 105 0–255 continuous
/mbase_11/kick_attack 106 0–255 continuous
/mbase_11/kick_eq 107 0–255 continuous
/mbase_11/kick_level 117 0–255 continuous
/mbase_11/compression 113 0–255 continuous
/mbase_11/gate 114 0–255 continuous
/mbase_11/metal_noise 115 0–255 continuous
/mbase_11/lfo_waveform 119 0–127 continuous
/mbase_11/lfo_intensity 121 0–255 continuous
/mbase_11/lfo_rate 122 0–255 continuous
/mbase_11/lfo_sync 120 0–127 continuous
/mbase_11/lfo_one_shot 123 0–127 continuous

Performance MIDI

Notes, pitch bend and any CC are also available: /mbase_11/note/on <note> <velocity>, /mbase_11/cc/<number> <value>, /mbase_11/pitchbend <0-16383>, /mbase_11/program_change <n>.

Limitations

CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.

Frequently asked questions

How many parameters of the Jomox MBase 11 can be controlled over MIDI?

SynthHub's map of the Jomox MBase 11 lists 33 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.

Can an AI agent like Claude control the Jomox MBase 11?

Yes: SynthHub's hosted MCP server knows the Jomox MBase 11's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.