devices/haken-audio/continuum.electra-richard-kram-ctrl.fw-10.38.jsonEdit on GitHubJSONHaken Audio Continuum (per Electra preset) MIDI CC chart, NRPN and OSC map
The Haken Audio Continuum MIDI implementation: 34 CC, each named, for Claude (MCP), SuperCollider or any OSC app.
- sourceElectra One preset
- firmware10.38
- real unitnot yet checked
Not checked on a real Haken Audio Continuum yet. Own one? Load a sound or send a control, and tell us whether it worked.
- Maker
- Haken Audio
- Version
- per Electra preset
- Source
- Electra One preset
- OSC prefix
/continuum
Use it
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/haken-audio/continuum.electra-richard-kram-ctrl.fw-10.38.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as continuum: ask “what can the Haken Audio Continuum do?” and it reads this map with list_routes. See the MCP guide.
MIDI controls
34 controls, each with its number, its range and the name to send
| Control | CC | Range | Name to send |
|---|---|---|---|
| Macro i | 12 | 0–127 | /continuum/macro_i |
| Macro ii | 13 | 0–127 | /continuum/macro_ii |
| Macro iii | 14 | 0–127 | /continuum/macro_iii |
| Macro iv | 15 | 0–127 | /continuum/macro_iv |
| Macro v | 16 | 0–127 | /continuum/macro_v |
| Macro vi | 17 | 0–127 | /continuum/macro_vi |
| Sustain | 64 | 0–127 | /continuum/sustain |
| Mix | 24 | 0–127 | /continuum/mix |
| Pre delay r5 | 95 | 0–127 | /continuum/pre_delay_r5 |
| Mix | 93 | 0–127 | /continuum/mix |
| Min range | 68 | 0–127 | /continuum/min_range |
| Sos 1 | 66 | 0–127 | /continuum/sos_1 |
| Delay r4 | 23 | 0–127 | /continuum/delay_r4 |
| Hpf r6 | 96 | 0–127 | /continuum/hpf_r6 |
| Ratio | 92 | 0–127 | /continuum/ratio |
| Drive | 90 | 0–127 | /continuum/drive |
| Max range | 69 | 0–127 | /continuum/max_range |
| Sos 2 | 69 | 0–127 | /continuum/sos_2 |
| Feedback r3 | 22 | 0–127 | /continuum/feedback_r3 |
| Mix | 85 | 0–127 | /continuum/mix |
| Attack | 91 | 0–127 | /continuum/attack |
| Pedal 2 | 57 | 0–127 | /continuum/pedal_2 |
| Rate r2 | 21 | 0–127 | /continuum/rate_r2 |
| Frequency | 84 | 0–127 | /continuum/frequency |
| Min range | 70 | 0–127 | /continuum/min_range |
| Depth r1 | 20 | 0–127 | /continuum/depth_r1 |
| Tilt | 83 | 0–127 | /continuum/tilt |
| None max | 19 | 0–127 | /continuum/none_max |
| Max range | 53 | 0–127 | /continuum/max_range |
| 24db 0db | 27 | 0–127 | /continuum/24db_0db |
| Min max | 26 | 0–127 | /continuum/min_max |
| Min max | 18 | 0–127 | /continuum/min_max |
| Rate | 25 | 0–127 | /continuum/rate |
| Fine tune | 10 | 0–127 | /continuum/fine_tune |
Performance MIDI
Notes, pitch bend and any CC are also available: /continuum/note/on <note> <velocity>, /continuum/cc/<number> <value>, /continuum/pitchbend <0-16383>, /continuum/program_change <n>.
Limitations
Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.
Other versions
The Haken Audio Continuum is mapped in 3 versions. per Electra preset, per Electra preset.
Frequently asked questions
How many parameters of the Haken Audio Continuum can be controlled over MIDI?
SynthHub's map of the Haken Audio Continuum lists 34 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.
Can an AI agent like Claude control the Haken Audio Continuum?
Yes: SynthHub's hosted MCP server knows the Haken Audio Continuum's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.