Haken Audio Continuum & ContinuuMini by Haken Audio MIDI CC chart, NRPN and OSC map¶
The Haken Audio Continuum & ContinuuMini by Haken Audio MIDI implementation: 23 CC, each named, for Claude (MCP), SuperCollider or any OSC app.
| Device | Haken Audio Continuum & ContinuuMini by Haken Audio |
|---|---|
| Vendor | Haken Audio |
| OSC prefix | /continuum_continuumini_by_haken_audio |
| Source | 🎛️ Derived from an Electra One community preset |
| Revision | per Electra preset |
| Upstream | electra-preset |
| Driver file | devices/haken-audio/continuum_continuumini_by_haken_audio.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/haken-audio/continuum_continuumini_by_haken_audio.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as continuum_continuumini_by_haken_audio: ask “what can the Haken Audio Continuum & ContinuuMini by Haken Audio do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (23)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/continuum_continuumini_by_haken_audio/barrel_i |
12 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/barrel_ii |
13 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/barrel_iii |
14 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/barrel_iv |
15 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/g1 |
16 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/g2 |
17 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/r1 |
20 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/r2 |
21 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/r3 |
22 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/r4 |
23 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/recirc_mix |
24 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/master_gain |
27 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/sustain |
64 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/sostenuto_1 |
66 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/sostenuto_2 |
69 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/init_round |
28 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/round_rate |
25 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/eq_tilt |
83 | -64–64 | continuous | ||
/continuum_continuumini_by_haken_audio/eq_frequency |
84 | 120–15000 | continuous | ||
/continuum_continuumini_by_haken_audio/eq_mix |
85 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/aes_input_lev |
19 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/pre_master_lvl |
26 | 0–127 | continuous | ||
/continuum_continuumini_by_haken_audio/post_master_lv |
18 | 0–127 | continuous |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /continuum_continuumini_by_haken_audio/note/on <note> <velocity>, /continuum_continuumini_by_haken_audio/cc/<number> <value>, /continuum_continuumini_by_haken_audio/pitchbend <0-16383>, /continuum_continuumini_by_haken_audio/program_change <n>.
Limitations¶
Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.
Frequently asked questions¶
How many parameters of the Haken Audio Continuum & ContinuuMini by Haken Audio can be controlled over MIDI?
SynthHub's map of the Haken Audio Continuum & ContinuuMini by Haken Audio lists 23 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.
Can an AI agent like Claude control the Haken Audio Continuum & ContinuuMini by Haken Audio?
Yes: SynthHub's hosted MCP server knows the Haken Audio Continuum & ContinuuMini by Haken Audio's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.