Behringer Pro 800 MIDI CC chart, NRPN and OSC map¶
The Behringer Pro 800 MIDI implementation: 102 CC, 1 SysEx commands, each named, for Claude (MCP), SuperCollider or any OSC app.
| Device | Behringer Pro 800 |
|---|---|
| Vendor | Behringer |
| OSC prefix | /pro_800 |
| Source | 🎛️ Derived from an Electra One community preset |
| Revision | per pencilresearch canonical CSV |
| Upstream | electra-preset |
| Driver file | devices/behringer/pro_800.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/behringer/pro_800.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as pro_800: ask “what can the Behringer Pro 800 do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (103)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/pro_800/banksel |
continuous | ||||
/pro_800/mod_wheel |
1 | 0–127 | continuous | ||
/pro_800/breath |
2 | 0–127 | continuous | ||
/pro_800/master_tune |
3 | 0–127 | continuous | ||
/pro_800/nrpn_data_msb |
6 | 0–127 | continuous | ||
/pro_800/mainvolume |
7 | 0–127 | continuous | ||
/pro_800/osca_freq |
80 | 0–127 | continuous | ||
/pro_800/osca_vol |
81 | 0–127 | continuous | ||
/pro_800/oscapw |
82 | 0–127 | continuous | ||
/pro_800/oscb_freq |
83 | 0–127 | continuous | ||
/pro_800/oscb_vol |
84 | 0–127 | continuous | ||
/pro_800/oscbpw |
85 | 0–127 | continuous | ||
/pro_800/oscb_fine |
86 | 0–127 | continuous | ||
/pro_800/vcf_freq |
87 | 0–127 | continuous | ||
/pro_800/vcf_reso |
88 | 0–127 | continuous | ||
/pro_800/vcfen_vamount |
89 | 0–127 | continuous | ||
/pro_800/vcf_rel |
90 | 0–127 | continuous | ||
/pro_800/vcf_sus |
91 | 0–127 | continuous | ||
/pro_800/vcf_dec |
92 | 0–127 | continuous | ||
/pro_800/vcf_atck |
93 | 0–127 | continuous | ||
/pro_800/vca_rel |
94 | 0–127 | continuous | ||
/pro_800/vca_sus |
95 | 0–127 | continuous | ||
/pro_800/vca_dec |
100 | 0–127 | continuous | ||
/pro_800/vca_atck |
101 | 0–127 | continuous | ||
/pro_800/pmod_filter_envamount |
102 | 0–127 | continuous | ||
/pro_800/pmod_osc_bamount |
103 | 0–127 | continuous | ||
/pro_800/lfo_freq |
104 | 0–127 | continuous | ||
/pro_800/lfo_amount |
105 | 0–127 | continuous | ||
/pro_800/glide |
106 | 0–127 | continuous | ||
/pro_800/vca_vel |
107 | 0–127 | continuous | ||
/pro_800/vcf_vel |
108 | 0–127 | continuous | ||
/pro_800/moddelay |
109 | 0–127 | continuous | ||
/pro_800/vib_freq |
110 | 0–127 | continuous | ||
/pro_800/vib_amt |
111 | 0–127 | continuous | ||
/pro_800/unison_detune |
112 | 0–127 | continuous | ||
/pro_800/noise |
113 | 0–127 | continuous | ||
/pro_800/nrpn_data_lsb |
38 | 0–127 | continuous | ||
/pro_800/vca_aftertouch |
114 | 0–127 | continuous | ||
/pro_800/vcf_aftertouch |
115 | 0–127 | continuous | ||
/pro_800/osca_saw |
49 | 0–127 | continuous | ||
/pro_800/osca_square |
50 | 0–127 | continuous | ||
/pro_800/oscb_saw |
51 | 0–127 | continuous | ||
/pro_800/osbb_tri |
52 | 0–127 | continuous | ||
/pro_800/osbb_square |
53 | 0–127 | continuous | ||
/pro_800/oscb_sync |
54 | 0–127 | continuous | ||
/pro_800/pmod_freq_a |
55 | 0–127 | continuous | ||
/pro_800/pmod_vcf |
56 | 0–127 | continuous | ||
/pro_800/lfo_shape |
57 | 0–127 | continuous | ||
/pro_800/lfo_speed |
58 | 0–127 | continuous | ||
/pro_800/lfo_targets |
59 | 0–127 | continuous | ||
/pro_800/vcf_keyboard |
60 | 0–127 | continuous | ||
/pro_800/vcfenv_exp |
61 | 0–127 | continuous | ||
/pro_800/vcfenv_speed |
62 | 0–127 | continuous | ||
/pro_800/vcaenv_exp |
63 | 0–127 | continuous | ||
/pro_800/sustainpedal |
64 | 0–127 | continuous | ||
/pro_800/unison |
65 | 0–127 | continuous | ||
/pro_800/bendertarget |
66 | 0–127 | continuous | ||
/pro_800/modwheel_amount |
67 | 0–127 | continuous | ||
/pro_800/chromatic_pitch_a |
68 | 0–127 | continuous | ||
/pro_800/chromatic_pitch_b |
69 | 0–127 | continuous | ||
/pro_800/modwheel_target |
70 | 0–127 | continuous | ||
/pro_800/vibrato_target |
71 | 0–127 | continuous | ||
/pro_800/vcaenv_speed |
72 | 0–127 | continuous | ||
/pro_800/arp_mode |
73 | 0–127 | continuous | ||
/pro_800/lfo_dest_freq |
74 | 0–127 | continuous | ||
/pro_800/lfo_dest_filter |
75 | 0–127 | continuous | ||
/pro_800/lfo_dest_pwm |
76 | 0–127 | continuous | ||
/pro_800/nrpn_dataincrement |
96 | 0–127 | continuous | ||
/pro_800/nrpn_datadecrement |
97 | 0–127 | continuous | ||
/pro_800/nrpn_param_lsb |
98 | 0–127 | continuous | ||
/pro_800/nrpn_param_msb |
99 | 0–127 | continuous | ||
/pro_800/lfo_aftertouch |
116 | 0–127 | continuous | ||
/pro_800/allsoundsoff |
120 | 0–127 | continuous | ||
/pro_800/allnotesoff |
123 | 0–127 | continuous | ||
/pro_800/oscillators/osc_a_freq |
80 | 0–127 | continuous | Oscillators | |
/pro_800/oscillators/osc_b_freq |
83 | 0–127 | continuous | Oscillators | |
/pro_800/pmod_flt_amt |
102 | 0–127 | continuous | ||
/pro_800/oscillators/osc_a_vol |
81 | 0–127 | continuous | Oscillators | |
/pro_800/oscillators/osc_b_vol |
84 | 0–127 | continuous | Oscillators | |
/pro_800/pmod_osc_b_amt |
103 | 0–127 | continuous | ||
/pro_800/mod_delay |
109 | 0–127 | continuous | ||
/pro_800/oscillators/osc_a_pw |
82 | 0–127 | continuous | Oscillators | |
/pro_800/oscillators/osc_b_pw |
85 | 0–127 | continuous | Oscillators | |
/pro_800/oscillators/noise |
71 | 0–127 | continuous | Oscillators | |
/pro_800/oscillators/osc_b_fine |
86 | 0–127 | continuous | Oscillators | |
/pro_800/vcf_env_amount |
89 | 0–127 | continuous | ||
/pro_800/lfo_dest_filt |
75 | 0–127 | continuous | ||
/pro_800/vca_env |
101 | 0–127 | continuous | ||
/pro_800/vca_env |
100 | 0–127 | continuous | ||
/pro_800/vca_env |
95 | 0–127 | continuous | ||
/pro_800/vca_env |
94 | 0–127 | continuous | ||
/pro_800/bank_a_b_c_d |
0 | 0–127 | continuous | ||
/pro_800/vcf_env |
93 | 0–127 | continuous | ||
/pro_800/vcf_env |
92 | 0–127 | continuous | ||
/pro_800/vcf_env |
91 | 0–127 | continuous | ||
/pro_800/vcf_env |
90 | 0–127 | continuous | ||
/pro_800/osc_a_saw |
48 | 0–127 | continuous | ||
/pro_800/osc_a_saw |
49 | 0–127 | continuous | ||
/pro_800/osc_a_square |
50 | 0–127 | continuous | ||
/pro_800/osc_b_saw |
51 | 0–127 | continuous | ||
/pro_800/osc_b_tri |
52 | 0–127 | continuous | ||
/pro_800/osc_b_square |
53 | 0–127 | continuous | ||
/pro_800/osc_b_sync |
54 | 0–127 | continuous |
SysEx commands (1)¶
| OSC address | Arguments |
|---|---|
/pro_800/vcf_freq |
val: u7 |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /pro_800/note/on <note> <velocity>, /pro_800/cc/<number> <value>, /pro_800/pitchbend <0-16383>, /pro_800/program_change <n>.
Limitations¶
CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.
Frequently asked questions¶
How many parameters of the Behringer Pro 800 can be controlled over MIDI?
SynthHub's map of the Behringer Pro 800 lists 102 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.
Can an AI agent like Claude control the Behringer Pro 800?
Yes: SynthHub's hosted MCP server knows the Behringer Pro 800's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.