SynthHub
Written from devices/akai/mpc2000.vendor.fw-1.7.json, updated 2026-10-27Edit on GitHubJSONCSVMIDNAMOSCQuery

Akai MPC2000 running MPC2000 Version 1.3, 1.5 and 1.7 addenda

The Akai MPC2000 MIDI implementation: 2 CC, 5 SysEx commands, each named, for Claude (MCP), SuperCollider or any OSC app.

  • sourcemaker's documentation
  • firmware1.7
Maker
Akai
Firmware
MPC2000 Version 1.3, 1.5 and 1.7 addenda (Japanese)
Source
maker's documentation

Communities

Share and load its sounds

Plug the Akai MPC2000 into your computer, open shared presets in Chrome, Edge or Opera and press Connect my synth: SynthHub finds it, takes the sound it plays and names it. Sounds others shared for it load from their page the same way.

https://web.archive.org/web/20031016101702/http://www.akaipro.com:80/jp/datalib/download/documents/manuals/apro/mpc/m2kv15j.pdf

Repository

MIDI controls

7 controls, from the source at MPC2000 Version 1.3, 1.5 and 1.7 addenda (Japanese)

Channel mode

ControlCCRangeName to send
All notes off123trigger/mpc2000/all_notes_off

Sampler

ControlCCRangeName to send
Note variation70–127/mpc2000/note_variation

SysEx commands

CommandArgumentsName to send
Transport clock/mpc2000/transport/clock
Transport start/mpc2000/transport/start
Transport continue/mpc2000/transport/continue
Transport stop/mpc2000/transport/stop
Song positionbeats: u14/mpc2000/song/position

Performance MIDI

Notes, pitch bend and any CC are also available: /mpc2000/note/on <note> <velocity>, /mpc2000/cc/<number> <value>, /mpc2000/pitchbend <0-16383>, /mpc2000/program_change <n>.

JSON

Use it

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device akai/mpc2000.vendor.fw-1.7 --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /mpc2000/all_notes_off 0

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as mpc2000: ask “what can the Akai MPC2000 do?” and it reads this map with list_routes. See the MCP guide.

Programs and banks

A program change selects a sound.

The sound generator section recognises program changes 0-127 and selects a program.

Limitations

Source: Akai MPC2000 Version 1.5 addendum (Japanese, 1997): MIDI implementation charts (sound generator and sequencer sections, version 1.0), MIDI Footswitch Assignment, MIDI sample dump and Receive MMC; with the Version 1.3 addendum (mix change SysEx) and Version 1.7 addendum (multi-sample dump, sync out on A and B), same Akai Japan document folder (m2kv13j.pdf, m2kv17j.pdf). The MIDI charts list the sampler (sound generator) section: notes 35-98 play the program's pads on its MIDI channel, Program Change 0-127 selects the program, channel pressure drives Note Repeat; the sequencer records and plays any channel message, which the performance routes cover. System Exclusive: sent and received by both sections; the MIDI Sample Dump Standard (V1.5 addendum, exclusive channel set on the unit) is not mapped. The MPC2000 Operator's Manual itself was not found; these addenda give the charts but no default pad-to-note table, so pads are not listed as triggers: notes 35-98 play whatever the program assigns. The sound generator's default channel is 16 per the chart. MIDI Footswitch Assignment maps any user-chosen CC number (value 64 or more) to PLAY START, PLAY, STOP, REC+PLAY, OVERDUB+PLAY, punch, TAP, PAD BANK, pads 01-16 and F1-F6; the numbers are set on the unit, so none is fixed here. Receive MMC can be switched on (SYNC page) but the received commands are not listed. Mixer changes are recorded in sequences as F0 47 00 44 45 type pad value F7 (type 01 stereo level, 02 stereo pan, 03 FX send, 04 individual level; pad A01-D16 = 00-3F; value 00-64H); the addendum does not say they are received from MIDI IN, so they are not mapped. Untested on hardware.

Firmwares

The Akai MPC2000 runs 2 firmwares SynthHub maps, each with its own MIDI or another's it shares. All the devices with several: firmwares.

FirmwareFromLicenceMIDISounds
MPC2000 MODS 2.0github.com/dariuszchyneksame as MPC2000 Version 1.3, 1.5 and 1.7 addenda
MPC2000 Version 1.3, 1.5 and 1.7 addendaweb.archive.orgits own

Frequently asked questions

How many parameters of the Akai MPC2000 can be controlled over MIDI?

SynthHub's map of the Akai MPC2000 lists 2 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.

Can an AI agent like Claude control the Akai MPC2000?

Yes: SynthHub's hosted MCP server knows the Akai MPC2000's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.