devices/akai/ax60.electra-feinsveur.fw-tauntek.jsonEdit on GitHubJSONAkai AX60 (per Electra preset) MIDI CC chart, NRPN and OSC map
The Akai AX60 MIDI implementation: 32 CC, each named, for Claude (MCP), SuperCollider or any OSC app.
- sourceElectra One preset
- firmwaretauntek
- real unitnot yet checked
Not checked on a real Akai AX60 yet. Own one? Load a sound or send a control, and tell us whether it worked.
- Maker
- Akai
- Version
- per Electra preset
- Source
- Electra One preset
- OSC prefix
/ax60
Use it
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/akai/ax60.electra-feinsveur.fw-tauntek.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as ax60: ask “what can the Akai AX60 do?” and it reads this map with list_routes. See the MCP guide.
MIDI controls
32 controls, each with its number, its range and the name to send
| Control | CC | Range | Name to send |
|---|---|---|---|
| Octave | 15 | 0–127 | /ax60/octave |
| Pulse width | 16 | 0–127 | /ax60/pulse_width |
| Noise | 19 | 0–127 | /ax60/noise |
| Volume | 7 | 0–127 | /ax60/volume |
| Chorus | 44 | 0–127 | /ax60/chorus |
| Waveform | 14 | 0–127 | /ax60/waveform |
| Pwm | 17 | 0–127 | /ax60/pwm |
| Sampler | 20 | 0–127 | /ax60/sampler |
| A b balance | 21 | 0–127 | /ax60/a_b_balance |
| Cutoff | 74 | 0–127 | /ax60/cutoff |
| Polarity | 25 | 0–127 | /ax60/polarity |
| Vco fm | 23 | 0–127 | /ax60/vco_fm |
| Resonance | 71 | 0–127 | /ax60/resonance |
| Key follow | 22 | 0–127 | /ax60/key_follow |
| Hpf | 24 | 0–127 | /ax60/hpf |
| Vca | 73 | 0–127 | /ax60/vca |
| Vca | 32 | 0–127 | /ax60/vca |
| Vca | 33 | 0–127 | /ax60/vca |
| Vca | 72 | 0–127 | /ax60/vca |
| Vca eg depth | 34 | 0–127 | /ax60/vca_eg_depth |
| Vca gate | 26 | 0–127 | /ax60/vca_gate |
| Waveform | 40 | 0–127 | /ax60/waveform |
| Delay | 43 | 0–127 | /ax60/delay |
| Vcf | 27 | 0–127 | /ax60/vcf |
| Vcf | 28 | 0–127 | /ax60/vcf |
| Vcf | 29 | 0–127 | /ax60/vcf |
| Vcf | 30 | 0–127 | /ax60/vcf |
| Vcf eg depth | 31 | 0–127 | /ax60/vcf_eg_depth |
| Vco eg depth | 18 | 0–127 | /ax60/vco_eg_depth |
| Destination | 39 | 0–127 | /ax60/destination |
| Rate | 42 | 0–127 | /ax60/rate |
| Depth | 41 | 0–127 | /ax60/depth |
Performance MIDI
Notes, pitch bend and any CC are also available: /ax60/note/on <note> <velocity>, /ax60/cc/<number> <value>, /ax60/pitchbend <0-16383>, /ax60/program_change <n>.
Limitations
Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.
Other versions
The Akai AX60 is mapped in 2 versions. per Electra preset.
Frequently asked questions
Which MIDI CC controls the filter cutoff on the Akai AX60?
CC 74 (0–127), named /ax60/cutoff in SynthHub's map.
How many parameters of the Akai AX60 can be controlled over MIDI?
SynthHub's map of the Akai AX60 lists 32 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.
Can an AI agent like Claude control the Akai AX60?
Yes: SynthHub's hosted MCP server knows the Akai AX60's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.