{
 "_sources": [
  {
   "type": "vendor-doc",
   "name": "norns script demoncore",
   "url": "https://github.com/kevinlindley/demoncore/tree/89ae13841779d4470c2e13afeb37267755e50bcd",
   "notes": "norns script demoncore: demoncore.lua @ 89ae138. Licence AGPL-3.0. Listed in norns.community (monome/norns-community community.json @ 41d05e7).",
   "firmware": "demoncore-89ae138",
   "imported_at": "2026-10-26"
  }
 ],
 "_limitations": "Source: the Lua source of the norns script demoncore by KevinLindley (kevinlindley/demoncore at 89ae138), listed in norns.community. Shares the norns system OSC of monome/norns.vendor.fw-2.9.4 (port 10111, /param, /remote): give the norns' IP address as host override. Its own routes are the 7 parameter(s) whose id is written out in its source, read without running it, with range, options and default when written out too; set them while the script runs on the norns. Parameters added by libraries or engines outside the repository are not mapped either. A value goes in the parameter's units (an option's index from 1). MIDI is not mapped: the script's MIDI handling is its own and parameter MIDI mappings are learned by each user (PMAP). Untested on hardware.",
 "_coverage": {
  "host_software": "norns script demoncore",
  "commands": 7,
  "subscriptions": 0,
  "replies": 0
 },
 "midi_of": "monome/norns.vendor.fw-2.9.4",
 "device": {
  "name": "norns",
  "vendor": "Monome",
  "revision": "script demoncore (kevinlindley/demoncore @ 89ae138)",
  "osc_prefix": "/norns_demoncore"
 },
 "commands": [
  {
   "osc": "/param/volume",
   "section": "Parameters",
   "args": [
    {
     "name": "value",
     "type": "int",
     "range": [
      0,
      100
     ],
     "default": 50
    }
   ],
   "forward": {
    "path": "/param/volume",
    "args": [
     "{value}"
    ]
   },
   "_notes": "volume."
  },
  {
   "osc": "/param/density",
   "section": "Parameters",
   "args": [
    {
     "name": "value",
     "type": "int",
     "range": [
      0,
      31
     ],
     "default": 1
    }
   ],
   "forward": {
    "path": "/param/density",
    "args": [
     "{value}"
    ]
   },
   "_notes": "density."
  },
  {
   "osc": "/param/mix",
   "section": "Parameters",
   "args": [
    {
     "name": "value",
     "type": "int",
     "range": [
      0,
      100
     ],
     "default": 50
    }
   ],
   "forward": {
    "path": "/param/mix",
    "args": [
     "{value}"
    ]
   },
   "_notes": "mix."
  },
  {
   "osc": "/param/cutoff",
   "section": "Parameters",
   "args": [
    {
     "name": "value",
     "type": "int",
     "range": [
      0,
      20000
     ],
     "default": 8000
    }
   ],
   "forward": {
    "path": "/param/cutoff",
    "args": [
     "{value}"
    ]
   },
   "_notes": "cutoff."
  },
  {
   "osc": "/param/resamount",
   "section": "Parameters",
   "args": [
    {
     "name": "value",
     "type": "int",
     "range": [
      0,
      100
     ],
     "default": 50
    }
   ],
   "forward": {
    "path": "/param/resamount",
    "args": [
     "{value}"
    ]
   },
   "_notes": "resamount."
  },
  {
   "osc": "/param/room",
   "section": "Parameters",
   "args": [
    {
     "name": "value",
     "type": "int",
     "range": [
      0,
      100
     ],
     "default": 70
    }
   ],
   "forward": {
    "path": "/param/room",
    "args": [
     "{value}"
    ]
   },
   "_notes": "room."
  },
  {
   "osc": "/param/damp",
   "section": "Parameters",
   "args": [
    {
     "name": "value",
     "type": "int",
     "range": [
      0,
      100
     ],
     "default": 20
    }
   ],
   "forward": {
    "path": "/param/damp",
    "args": [
     "{value}"
    ]
   },
   "_notes": "damp."
  }
 ]
}