{ "_sources": [ { "type": "vendor-doc", "url": "https://archive.org/details/manualzilla-id-7356606", "notes": "ENSONIQ ASR-10 Musician's Manual: Section 2 Edit/System-MIDI parameters (pedal, base channel, MIDI in modes, receiving program changes), Section 4 (patch select buttons) and Section 17 Sequencing/MIDI Applications (external MIDI clock). Every route comes from these pages.", "firmware": "unknown", "imported_at": "2026-10-26" } ], "_limitations": "Source: ASR-10 Musician's Manual, MIDI chapters (no MIDI implementation chart or SysEx specification in it). Pitch bend, mod wheel, pressure (key or channel), volume and sustain are sent and received when MIDI CONTROLLERS=ON, but the manual numbers only controllers #4, #7 and #70; MIDI XCTRL NUMBER (0-127) picks one more external controller as a modulator. MIDI IN MODE (OMNI, POLY, MULTI, MONO A, MONO B) and the base channel decide what is received; in MONO modes the base channel minus one carries global controllers. Program change meanings depend on the mode (selection/stack/presets versus file loads, directory exit and macros). Song Select 0-127 is sent when a song is loaded. Remote programming and WaveSample dumps exist over SysEx (MIDI SYS-EX=ON) but their format is not in this manual, so none is exposed. Untested on hardware.", "_coverage": { "entries_total": 13, "cc_entries": 3, "rpn_entries": 0, "nrpn_entries": 0, "sysex_commands": 0, "realtime_commands": 4, "channel_and_common_commands": 6, "note_triggers": 0, "replies": 0 }, "device": { "name": "ASR-10", "vendor": "Ensoniq", "revision": "ASR-10 Musician's Manual (MIDI chapters)", "osc_prefix": "/asr_10", "manufacturer_id": [ 15 ], "device_id": [] }, "sysex": { "header": [], "footer": [], "_notes": "Empty on purpose: each command frame carries its complete message." }, "midi_out": { "default_channel": 0, "note_offset": 0 }, "midi_in": { "note_on": "/note/on {note} {velocity} {channel}", "note_off": "/note/off {note} {velocity} {channel}", "cc": "/cc/{num} {value} {channel}", "program_change": "/program_change {program} {channel}" }, "commands": [ { "osc": "/instrument/{instrument}/select", "section": "Program change", "args": [ { "name": "instrument", "type": "u7", "range": [ 1, 8 ] } ], "_notes": "Program change 1-8 (as numbered in the manual, 00-07H): selects instrument 1-8, or deselects it if already selected. Received on the base channel (channel 1 here) when MIDI PROG CHANGE=ON and MIDI IN MODE is OMNI, POLY or MONO A. For another channel use /program_change {program} {channel}.", "pre": [ { "bind": "_p", "expr": "instrument - 1" } ], "frame": [ 192, "{_p}" ] }, { "osc": "/instrument/{instrument}/stack", "section": "Program change", "args": [ { "name": "instrument", "type": "u7", "range": [ 1, 8 ] } ], "_notes": "Program change 9-16 (08-0FH): stacks instrument 1-8. Received on the base channel (channel 1 here) when MIDI PROG CHANGE=ON and MIDI IN MODE is OMNI, POLY or MONO A. For another channel use /program_change {program} {channel}.", "pre": [ { "bind": "_p", "expr": "instrument + 7" } ], "frame": [ 192, "{_p}" ] }, { "osc": "/preset/{preset}/select", "section": "Program change", "args": [ { "name": "preset", "type": "u7", "range": [ 1, 8 ] } ], "_notes": "Program change 17-24 (10-17H): selects performance preset 1-8. Received on the base channel (channel 1 here) when MIDI PROG CHANGE=ON and MIDI IN MODE is OMNI, POLY or MONO A. For another channel use /program_change {program} {channel}.", "pre": [ { "bind": "_p", "expr": "preset + 15" } ], "frame": [ 192, "{_p}" ] }, { "osc": "/storage/exit_directory", "section": "Program change", "args": [], "_notes": "Program change 1 (00H): exit to the previous directory. In MULTI or MONO B mode, on the track's MULTI-IN MIDI channel (channel 1 here; other channels with /program_change {program} {channel}).", "frame": [ 192, 0 ] }, { "osc": "/storage/load_file/{file}", "section": "Program change", "args": [ { "name": "file", "type": "u7", "range": [ 1, 99 ] } ], "_notes": "Program change = file number + 1 (programs numbered 1-128, so the data byte is the file number): loads that instrument or bank file from the current storage device into the track; press Load first. In MULTI or MONO B mode, on the track's MULTI-IN MIDI channel (channel 1 here; other channels with /program_change {program} {channel}).", "frame": [ 192, "{file}" ] }, { "osc": "/macro/{macro}/run", "section": "Program change", "args": [ { "name": "macro", "type": "u7", "range": [ 0, 27 ] } ], "_notes": "Program change 101-128 (64-7FH): invokes macro 0-27. In MULTI or MONO B mode, on the track's MULTI-IN MIDI channel (channel 1 here; other channels with /program_change {program} {channel}).", "pre": [ { "bind": "_p", "expr": "macro + 100" } ], "frame": [ 192, "{_p}" ] }, { "osc": "/transport/clock", "section": "Sync", "args": [], "_notes": "MIDI clock (F8H). Followed when Edit/Seq-Song CLOCK SOURCE=MIDI.", "frame": [ 248 ] }, { "osc": "/transport/start", "section": "Sync", "args": [], "_notes": "MIDI Start (FAH): recording begins with the first clock after Start. Followed when Edit/Seq-Song CLOCK SOURCE=MIDI.", "frame": [ 250 ] }, { "osc": "/transport/stop", "section": "Sync", "args": [], "_notes": "MIDI Stop (FCH). Followed when Edit/Seq-Song CLOCK SOURCE=MIDI.", "frame": [ 252 ] }, { "osc": "/transport/continue", "section": "Sync", "args": [], "_notes": "MIDI Continue (FBH). Followed when Edit/Seq-Song CLOCK SOURCE=MIDI.", "frame": [ 251 ] } ], "cc_params": { "channel": 0, "_source": "ASR-10 Musician's Manual, Sections 2 and 4.", "entries": [ { "osc": "/pedal", "cc": 4, "range": [ 0, 127 ], "section": "Controllers", "_usage": "CV pedal as modulator (PEDAL=MOD): sent and received as controller #4." }, { "osc": "/volume", "cc": 7, "range": [ 0, 127 ], "section": "Controllers", "_usage": "Volume (PEDAL=VOLUME or volume slider): controller #7 on the selected instrument-sequence track." }, { "osc": "/patch_select", "cc": 70, "range": [ 0, 127 ], "expects": "discrete", "section": "Controllers", "_usage": "Patch select buttons, sent and received as controller #70 (the manual does not print which values stand for left, right or both)." } ] } }